However, by leaving out the more advanced features in the Omnidrive, BSS has achieved dramatically lower prices, ensuring that Minidrive is suitable for a range of applications for which an Omnidrive would simply not have been affordable. The FDST is able to drive a stereo 3-way system, and is expected to find favour in the front of house rack, while the FDST is expected to be at home in the monitor rack. Up to 38 bands of filtering are available in each unit.
As an added bonus, the Minidrive can be controlled by SIASoft's Smaart Live analysis program, allowing the installer or engineer to create systems with integrated measurement and processing. Individual Minidrive outputs can also be run full range.
With the low price of the units, this means that they are highly suited to use as zone controllers for convention centres, ballrooms, under-balcony feeds or downfills with EQ and delay, or for replacing several traditional analogue units in an installed sound system in just one rack space.
The four-arrow "navipad" allows access to menus and facilties, while push-to-select switches on the output level controls ensure fast access to channels for editing. Data is shown on a bright blue LCD display, with data entry via a parameter wheel. Input and output level meters are an immediate comfort for the engineer, and individual output band mute keys are provided. Together, these make the Minidrive more convenient and faster to set up and adjust than any DSP unit in its class.
The Digital Crossover System shall be configurable from a combination of two inputs and six four outputs, in a single 1U rack-mounting unit, each output having facilities for crossover, parametric EQ, mid-filter limiters, and delays.
Each input must have facilities for parametric EQ and delays. Any output may take its feed from any input, including a mono sum of the two inputs. All data shall be displayed numerically to provide a visual reference of crossover points, delay times, limiter and EQ settings. Individual LED meters shall be provided on each input and output. These LED indicators shall also show when clipping levels are approached. Each crossover output band shall be selectable to operate with a slope of 6, 12, 18, 24, 36, 48 or 52dB per octave.
If the mains fuse should blow , replace only with a new fuse of correct size 20 mm and rating. A 3-wire earthed outlet must always be used. The earth terminal of the IEC plug is required by. It must always be connected to the electrical installation safety. Outputs to eliminate the possibility of earth loops hum. About earth loops. A typical example of an earth loop situation would be when two inter connected components of.
In this case a path to ground exists both directly through the mains earth of each. In effect the two paths to earth form a loop antenna which picks up. Because of lead resistance these induced. V arious connection configurations can prevent ground loops occurring.
0コメント